Design and function
MIG/MAG welding
099-005403-EW501
10.2.2022
63
5.3.13.2 MIG/MAG
overview of parameters
P
START
, P
B
, and P
END
are set as relative programs ex faxtory. They relate to percentages of the wire
feed value of the main program P
A
. These programs can also be set in an absolute manner, if
desired (see Setting of special parameter P21).
Figure 5-50
Basic Parameters
Item Meaning / Explanation
Setting Range
1 Gas pre-flow time
0.0s to 20.0s
2 P
START
: Wire speed, relative
Arc length correction
1% to 200%
-9.9V to +9.9V
3 Duration
0.0s to 20.0s
4 Slope duration from P
START
to P
A
0.0s to 20.0s
5 P
A
: Wire speed, absolute
0.5 m/min to 25 m/min
6 Duration (spot time and superpulse)
0.01s to 20.0s
7 P
B
: Wire speed, relative
Arc length correction, relative
1% to 200%
-9.9V to +9.9V
8 Duration
0.01s to 20.0s
9 Slope duration from P
A
to P
END
0.0s to 20s
10 P
END
: Wire speed, relative
Arc length correction
1% to 200%
-9.9V to +9.9V
11 Duration (superpulse)
0.0s to 20s
12 Gas post-flow time
0.0s to 20s
13 superPuls
On / Off
5.3.13.3 Example, tack welding (non-latched)
Figure 5-51
Basic parameters
Parameter
Meaning / explanation
Setting range
GASstr
Gas pre-flow time
0.0s to 20.0s
GASend:
Gas post-flow time
0.0s to 20s
RUECK
Wire burn-back length
2 to 500
"P
A
" main program
Parameter
Meaning / explanation
Setting range
Setting the wire speed
