Design and function
Transport and installation
34
099-005403-EW501
10.2.2022
5.2.10 Protective flap, welding machine control
Figure 5-12
Item Symbol Description
0
1
Protective cap
2
Lid
3
Bracket, protective cap
• Push the right-hand bracket of the protective cap to the right and remove the protective cap.
5.2.11 Dirt filter
These accessory components can be retrofitted as an option
> see 9 chapter
.
When using a dirt filter, the cooling air throughput is reduced and the duty cycle of the machine is reduced
as a result. The duty cycle decreases with the increasing contamination of the filter. The dirt filter must be
remove at regular intervals and cleaned by blowing out with compressed air (depending on the level of
soiling).
