Technical data
Microplasma 25-2 PG RC
62
099-007033-EW501
4.1.2022
8
Technical data
Performance specifications and guarantee only in connection with original spare and replacement
parts!
8.1 Microplasma 25-2 PG RC
Plasma
TIG
Welding current (I
2
)
0,3 A to 20 A
2 A to 20 A
Welding voltage according to standard (U
2
)
25,0 V to 25,8 V
10,1 V to 10,8 V
Plasma current (pilot arc)
2-6 A
Duty cycle DC at 40° C
[1]
100 %
20 A
Open circuit voltage (U
0
)
95 V
Ignition voltage (U
P
)
12 kV
Mains voltage (Tolerance)
1 x 230 V (-40 % to +15 %)
Frequency
50/60 Hz
mains fuse
[2]
1 x 10 A
Mains connection cable
H07RN-F3G2,5
max. Connected load (S
1
)
1,5 kVA
0,8 kVA
Generator rating (Rec.)
2 kVA
Cos φ
0,99
Protection class / Overvoltage category
Ⅰ
/
Ⅲ
Contamination level
3
Insulation class / protection classification
H / IP 23
Residual current circuit breaker
Type B (recommended)
Noise level
[3]
<70 dB(A)
Ambient temperature
[4]
-25 °C to +40 °C
Machine cooling / Torch cooling
Fan (AF) / Cooling unit, ext.
Workpiece lead (min.)
25 mm
2
EMC class
A
Safety marking
/ /
Standards used
See declaration of conformity (appliance documents)
Dimensions (l x b x h)
625 x 377 x 531 mm
24.6 x 14.8 x 20.9 inch
Weight
36,6 kg
79.8 lb.
[1]
Load cycle: 10 min. (60 % DC
≙
6 min. welding, 4 min. pause)
[2]
Safety fuses are recommended DIAZED xxA gG. When using automatic cutouts, the "C" trigger char-
acteristic must be used.
[3]
Noise level during idle mode and operation under standard load according to IEC 60974
‑
1 at the maxi-
mum operating point.
[4]
Ambient temperature dependent on coolant! Observe coolant temperature range!
