EWM Microplasma 105-2 PG RC Скачать руководство пользователя страница 28

Страница: 28 / 67

Design and function

Transport and installation

099-007033-EW501

4.1.2022

5.1.6 Mains connection

DANGER

Hazards caused by improper mains connection!

An improper mains connection can cause injuries or damage property!

• The connection (mains plug or cable), the repair or voltage adjustment of the device must

be carried out by a qualified electrician in accordance with the respective local laws or na-

tional regulations!

• The mains voltage indicated on the rating plate must match the supply voltage.

• Only operate machine using a socket that has correctly fitted protective earth.

• Mains plug, socket and lead must be checked by a qualified electrician on a regular basis!

• When operating the generator, always ensure it is earthed as stipulated in the operating in-

structions. The network created must be suitable for operating machines according to pro-

tection class I.

5.1.6.1 Mains configuration

The machine may only be connected to a one-phase system with two conductors and an earthed

neutral conductor.

Figure 5-5

Legend

Item

Designation

Colour code

Outer conductor

brown

Neutral conductor

blue

Protective conductor

green-yellow

• Insert mains plug of the switched-off machine into the appropriate socket.

5.1.7 Shielding and plasma gas supply

WARNING

Risk of injury due to improper handling of shielding gas cylinders!

Improper handling and insufficient securing of shielding gas cylinders can cause seri-

ous injuries!

• Observe the instructions from the gas manufacturer and any relevant regulations concern-

ing the use of compressed air!

• Do not attach any element to the shielding gas cylinder valve!

• Prevent the shielding gas cylinder from heating up.

An unhindered shielding gas supply from the shielding gas cylinder to the welding torch is a

fundamental requirement for optimum welding results. In addition, a blocked shielding gas sup-

ply may result in the welding torch being destroyed.

• Always re-fit the yellow protective cap when not using the shielding gas connection.

• All shielding gas connections must be gas tight.

Содержание Microplasma 105-2 PG RC




































































Результаты поиска

Содержание Microplasma 105-2 PG RC

Отзывы:

Похожие инструкции для Microplasma 105-2 PG RC

Бренды по названию

Популярные бренды

EWM Microplasma 105-2 PG RC, Руководство по эксплуатации

Результаты поиска

Содержание Microplasma 105-2 PG RC

Отзывы:

Похожие инструкции для Microplasma 105-2 PG RC

Бренды по названию

Популярные бренды