6
Telesm a r t T XG
6
2.0 Safety
This paragraph provides an overview of all important safety
aspects for optimal protection of personnel as well as safe
and trouble-free operation.
Disregarding this Manual and safety regulations specified
therein may result in considerable danger and possible seri-
ous injury or death.
2.1 Use
2.1.1 Intended use
The telescopic pillar TXG have been designed and built ex-
clusively for the intended purposes as described below.
• These pillars are to be only used for a dynamic centric and
offcenter lift charged with pressure.
• These pillars have been especially designed for height ad-
justments of medical applications, computer work and as-
sembly tables Any other use of these pillars must be au-
thorized by the manufacturer.
• These pillars are only suitable for indoor applications and
may not be exposed to the outdoors, heavy UV radiation
or dusty, corrosive or explosive environments.
Any use that extends beyond the intended use or a use dif-
ferent than the one described above is deemed misuse.
WARNING
Risk from misuse
Any utilization of this device beyond its intended purpose may
lead to potentially hazardous situations..
Therefore:
• Strictly adhere to all safety precautions and instructions in this
operating manual.
• Do not make this device subject to weather conditions, strong UV
rays, corrosive or explosive air media as well as other aggressive
media.
• Do not modify, retool or change the structural design or individual
components of the actuator.
• Never use the device outside of the technical application and op-
erational limits.
Any injury, damage or loss caused by a failure to follow the
instructions in this manual will be the responsibility of the
purchaser.
2.1.1.1 Product life time
Telesmart telescopic pillar have been designed for a service
life of 10 000 double strokes at a stroke length of 300 mm
(this applies for a centric maximum load as per the data
label).
The Telesmart requires no maintenance during this period.
Internal tests must be performed if other requirements relat-
ing to service life are specified.
2.1.2 Unintended Use
Any use other than the intended use without the manufac-
tuer’s written agreement or operation beyond the technical
limits is considered unauthorized.
Specific excluded applications are:
• Flammable Anaesthetic Mixture with air
• Flammable Anaesthetic Mixture with Oxygen or nitrous ox-
ide increased radiation places exposed to water (wetrooms)
2.1.3 Essential performance
Holding or moving a load.
2.2 Responsibility of the
owner and processor
The device is designed both for personal use and for use in
in commercial applications by owner or processors.
The processor is the contracting partner of the reseller or
the manufacturer. The processor installs the device in a
complete system (application).
The owner or processor of the system is therefore subject to
the requirements of the Occupational Health and Safety Act.
In addition to the safety instructions in this Manual, the
owner or processor must do the following concerning these
safety and accident prevention guidelines and environmental
protection regulations, applicable to the site of the system’s
installation:
• Inform themselves of applicable industrial safety regula-
tions and determine additional hazards that arise due to
the specific working conditions prevailing at the site where
the device is installed using risk assessment. The risk
