15
6.0 In s ta llation an d fir st o p eration
6.0 Installation and first operation
Authorized personnel
• The installation and first start of operation may only be
conducted by qualified personnel.
• Work on the electric system may only be performed by
trained electricians.
WARNING
Electric shock and moving parts hazards
Serious injury or death can be caused by touching live electrical
components and by unexpected movement of the actuator.
Be sure the system’s power supply is off and actuator is locked
out before installing.
WARNING
Danger if restarted without authorization!
When correcting faults, there is danger of the energy supply being
switched on without authorization. This poses a lifethreatening
hazard for persons in the danger zone.
Therefore:
• Prior to starting work switch off the system and safeguard it from
being lockout.
WARNING
Risk of injury and material damage due to incorrect installation
of the optional devices!
Therefore:
• Optional devices, in particular components that are part of
a retrofitting, may only be installed in accordance with the respec-
tive instructions (circuit diagram).
• The electromagnetic compatibility must be tested for the routing
and appropriate measures must be carried out if necessary.
6.1 Installation location
• Adhere to the technical data in accordance with operating
conditions.
• Install in a location where the actuator is not exposed to
strong UV radiation or corrosive or explosive air media.
6.2 Inspections prior to
first operation
• Execution by professional electrician
Prior to the first operation, a professional electrician must
perform and document the following tests and readings:
• Check visual condition
• Function check of operating features and safety features
• Reading of leakage currents
• Reading of insulation resistance
NOTE
Additional information concerning inspections and
readings (⮑ 8 Maintenance, page 23).
