With this card, the ADD-ON bus can only be used to either embed audio or de-embed audio.
When one of the EmbXx_Inp settings is set to embed from the ADD-ON bus, no audio will be
de-embedded towards the bus anymore, not for any of the channels.
#EmbA1_Inp_Ch ~
#EmbA4_Inp_Ch
(GXG110 only)
With these settings you can select which Channel of the selected input should
be embedded to the corresponding output channel. Can be any channel
between Ch_1 through Ch_16. Defaults for A1 through A4 are respectively Ch_1
through Ch_4.
#EmbB_Grp
With this setting you select into which audio group (= 4 audio channels) of the
outputs you want to embed the second 4 forwarded audio channels coming
from the de-embedders/add-on bus. Can be group1, group2, group3 or
group4. You can also choose to not use these 4 audio channels for anything
by setting this item to off. By default it is set to Group2.
#EmbB1_Inp ~
#EmbB4_Inp
With these settings you can select where the corresponding audio channels
(channel B1 till channel B4) of the outputs are coming from. In this card you
can choose to get the audio from the de-embedder of SDI input 1 (Demb-SDI1)
or SDI input 2 (Demb-SDI2), the embedder of the active input (Demb-
Input,dependant on the current active input), from the ADD-ON bus groups, or
to mute the corresponding channel (set to off). Defaults here are Off.
Note: With this card the ADD-ON bus can only be used to either embed audio
or de-embed audio. When one of the EmbXx_Inp settings is set to embed from
the ADD-ON bus, no audio will be de-embedded towards the bus anymore,
not for any of the channels.
#EmbB1_Inp_Ch ~
#EmbB4_Inp_Ch
(GXG110 only)
With these settings you can select which Channel of the selected input should
be embedded to the corresponding output channel. Can be any channel
between Ch_1 and Ch_16. Defaults for B1 till B4 are respectively Ch_5 till Ch_8.
#EmbC_Grp
With this setting you select in to which audio group (= 4 audio channels) of the
outputs you want to embed the third group of 4 forwarded audio channels
coming from the de-embedders/add-on bus. Can be group1, group2, group3
or group4. You can also choose to not use these 4 audio channels for anything
by setting this item to off. By default it is set to Group2.
#EmbC1_Inp ~
#EmbC4_Inp
With these settings you can select where the corresponding audio channels of
the outputs are coming from. In this card you can choose to get the audio from
the de-embedder of SDI input 1 (Demb-SDI1) or SDI input 2 (Demb-SDI2), the
embedder of the active input (Demb-Input, dependent on the current active
input), from the ADD-ON bus groups, or to mute the corresponding channel
(set to off). Defaults here are Off.
Note: With this card the ADD-ON bus can only be used to either embed audio
or de-embed audio. When one of the EmbXx_Inp settings is set to embed from
the ADD-ON bus, no audio will be de-embedded towards the bus anymore,
not for any of the channels.
INSTALLATION AND OPERATION MANUAL
Synapse GXG100 | 5. Settings Menu |
29
