Delay-Status
It is possible to display (in the IODelayA and IODelayB) the processing
time of the card in the Status menu. This setting allows you to switch this
function On or Off (default).
Lock-Mode
Lock-Mode determines whether the card is locked to its input input 1), to
the reference (Ref1 or Ref2) or freerun (not locked). Can also be set to
RefAuto. By default it is set to Ref1.
When set to RefAuto the card chooses ref1 as its source. Whenever ref1
fails, it will switch to ref 2 (only for SFR08 and SFR18 frames and only
when ref2 offers the same ref format as ref 1). When ref 1 is back up
again, it will only automatically switch back to ref 1 when ref 2 fails.
Ref-Type
Sets the type of incoming reference. Can be either Bi-Level (default) or
Tri- Level.
PrstEditView
With this setting set to Follow Active, the edit preset settings (e.g. UP_
Prst_editA and UP_Prst_editB) will follow the active preset when the
active preset is changed. This is to avoid confusion when changing the
active preset. Set to Independent, the edit preset will not automatically
follow active preset changes. By default set to Follow Active.
PatternSpeed
Sets the speed of the test-pattern (see settings Inp_SelA and Inp_SelB)
animation between 0 (still) and 15 (fast). Default is 1.
SD-AR-Det
This card can switch between presets on the changes of the aspect
ratio. Aspect ratio information can be taken out of the VI (video index),
WSS (widescreen signaling) or WSS-extended (extended form of
widescreen signaling). With this setting you can select which of the
above protocols should be used to detect aspect ratio changes. By
default it is set to VI.
INSTALLATION AND OPERATION MANUAL
Synapse GXG100 | 5. Settings Menu |
15
