•
H2_Only: less steep filter with aliasing and soft for C for less ringing,
more sharpness but with aliasing:
•
H2_And_V: same horizontal filter as described under H2_Only will be
active, together with the vertical filters described under V_only.
When the card is in Transparent mode, the filters will be entirely bypassed.
#VANC_Trans
Enables or disables the transfer from input to output of selected Vertical
Ancillary (VANC) lines. When the input format is the same as the output
format, the card is able to carry up to 6 lines containing packets inserted
in the Luminance Channel of the Vertical Ancillary space to the output.
With settings #VANC_Trans_Ln0 to #VANC_Trans_Ln5 the user may
select which lines to carry through to the output. The possible settings of
#VANC_Trans are On or Off. The default setting is Off.
#VANC_Trans_Ln0 ~
#VANC_Trans_Ln5
Selects a line to carry from input to output. You can choose 5 lines. Refer
to #VANC_Trans. Can be any line from line 7 through 41. If for instance
line 7 is selected, line 7 from the input is carried to line 7 at the output.
Pos-Prst_Act
Selects the active preset to control the positions #H-Pos-A, #V-Pos-A,
#H-Pos_B and #V-Pos-B. Here you can select which of the 8 selectable
positioning settings presets you want to activate. Default setting is 1.
Pos-Prst_Edit
Edit preset control for the position controls #H-Pos-A and #V-Pos-A.
Here you can select which of the 8 selectable positioning settings
presets you want to edit. Default setting is 1.
#H-Pos-A
Controls the horizontal positioning offset in pixels for channel A. Only
works correctly when zooming in, for instance when down-converting
using Center-Cut aspect ratio conversion.
#V-Pos-A
Controls the vertical positioning offset in pixels for channel A. Only works
correctly when zooming in, for instance when down-converting using
Center-Cut aspect ratio conversion.
14
| November 2021 | Issue 1.00.D
