Evoqua Wallace & Tiernan W3T158761, Руководство по установке

Страница: 17 / 38

Sensor measuring modules for MFC
Installation
4.
17
"mA out" module for
installation as mod 6
• All mA outputs can be assigned as desired:
Cl
2
, pH, Redox, Cl-N, conductivity, temperature, Ym/Yout
(See Instruction Manual „MFC” under "Input/Output" - "Analog
Output 1/2 or 3/4" Menu 1.5.)
• Load can be switched over 400 Ohm / max 1000 Ohm
Reset the respective bridge on the plug-in card:
L: < 400 Ohm / H: < 1000 Ohm
Plug terminal assignment:
mA-Out 1: Terminal 7: + / terminal 8: -
mA-Out 2: Terminal 5: + / terminal 6: -
mA-Out 3: Terminal 3: + / terminal 4: -
mA-Out 4: Terminal 1: + / terminal 2: -
A mA-Out 1 - load switch over
B mA-Out 2 - load switch over
C mA-Out 3 - load switch over
D mA-Out 4 - load switch over
Eight-way relay module
to install as mod 8
Wiring diagram for application 1 - 5, see appendix or Instruction
Manual „MFC”.
A C
D
B