Evoqua Wallace & Tiernan W3T158761, Руководство по установке

Страница: 15 / 38

Sensor measuring modules for MFC
Installation
4.
15
4.2 Installing and wiring plug-in card 1 to 7
1 Remove the slot's dummy cover.
Save for later use!
2 Insert and screw in the plug-in card.
3 If necessary, wire the sensor cable terminal strip and insert
into the plug-in card.
4 Attach the module identificaiton (I) on the cable according to
the module slot (mod 1 = 1, mod 2 = 2, mod 3 = 3 and
mod 4 = 4).
The respective wiring diagrams are listed in Chapter 5. “Wiring
Diagram" on page 27 or in the Instruction Manual „MFC” "Wiring
Diagrams".
"DES" module for DEPOLOX
®
5
and/or DEPOLOX
®
4 and
PT100
Terminal assignment:
1: Red (WRK)
4: White (REF)
5: Blue (CNT)
Shield: Black
Depending on the module slot, the included plug must be used for
connection on the left or right side.
Terminal assignments for plug-in card with PT100:
"pH" module
Please note
The sensor cable is already wired with pH plug-in card!
"mV" module
Please note
The sensor cable is already wired with mV plug-in card!
"F
-
" module
Please note
The sensor cable is already wired with F
-
plug-in card!