Evoqua Wallace & Tiernan W3T158761, Руководство по установке

Страница: 13 / 38

Sensor measuring modules for MFC
Installation
4.
13
4. Installation
4.1 Opening the housing
1 Remove the housing cover of the flow block assembly by
pressing the two buttons on the top of the housing.
Please note
(Not required for retrofitt kits without sensors)
2 Release the five screws on the cover of the electronic module.
The indication and operating elements on the cover of the
electronic module are connected to the housing with wires.
Please note
The unit automatically switches off when the cover is removed.
3 Carefully remove the electronic module cover and hang on the
strain relief.