background image

4

5

www.evolutionpowertools.com

www.evolutionpowertools.com

FR

ES

EN

(1.2)
This instruction manual was  
originally written in English. 

(1.3)

IMPORTANT

Please read these operating and safety 
instructions carefully and completely. 
For your own safety, if you are uncertain 
about any aspect of using this equipment 
please access the relevant technical helpline, 
the number of which can be found on the 
Evolution Power Tools website. We operate 
several helplines throughout our worldwide 
organization, but Technical help is also 
available from your supplier. 

WEB: 

www.evolutionpowertools.com

(1.4)
Congratulations on your purchase of an 
Evolution Power Tools Machine. Please 
complete your product registration ‘online’ 
as explained in the A4 online guarantee 
registration leaflet included with this 
machine. You can also scan the QR code 
found on the A4 leaflet with a Smart Phone. 
This will enable you to validate your 
machine’s guarantee period via Evolution’s 
website by entering your details and thus 
ensure prompt service if ever needed. We 
sincerely thank you for selecting a product 
from Evolution Power Tools. 

EVOLUTION LIMITED GUARANTEE. 

Evolution Power Tools reserves the right to 
make improvements and modifications to the 
product design without prior notice.

Please refer to the guarantee registration leaflet 
and/or the packaging for details of the terms 
and conditions of the guarantee. The guarantee 
below is applicable to machines destined for 
the UK mainland market only. Other markets 
may have specific requirements, additions or 
exclusions applied. Consult your dealer for 

details of the guarantee applied in your area/
country. All Evolution guarantees are in addition 
to your statutory rights.

(1.5)

Evolution Power Tools will, within the 
guarantee period, and from the original date of 
purchase, repair or replace any goods found to 
be defective in materials or workmanship. This 
guarantee is void if the tool being returned 
has been used beyond the recommendations 
in the Instruction Manual or if the machine 
has been damaged by accident, neglect, or 
improper service. This guarantee does not 
apply to machines and / or components which 
have been altered, changed, or modified 
in any way, or subjected to use beyond 
recommended capacities and specifications. 
Electrical components are subject to respective 
manufacturers’ warranties. All goods returned 
defective shall be returned prepaid freight 
to Evolution Power Tools. Evolution Power 
Tools reserves the right to repair or replace 
it with the same or equivalent item.  There 
is no warranty – written or verbal – for 
consumable accessories such as (following list 
not exhaustive) blades, cutters, drills, chisels 
or paddles etc.  In no event shall Evolution 
Power Tools be liable for loss or damage 
resulting directly or indirectly from the use 
of our merchandise or from any other cause.  
Evolution Power Tools is not liable for any 
costs incurred on such goods or consequential 
damages. No officer, employee or agent of 
Evolution Power Tools is authorized to make 
oral representations of fitness or to waive any 
of the foregoing terms of sale and none shall 
be binding on Evolution Power Tools. 

Questions relating to this limited 
guarantee should be directed to the 
company’s head office, or call the 
appropriate helpline number.

TABLE OF CONTENTS

English

Page 2

Español

Página 32

Français

Page 64

INTRODUCTION

Page 5

Guarantee

Page 5

Machine Specifications

Page 6

Vibration

Page 8

Labels and Symbols

Page 9

Intended use of this Power Tool

Page 9

Prohibited use of this Power Tool

Page 10

SAFETY PRECAUTIONS

Page 10

Outdoor Use

Page 10

General Power Tool Safety Instructions

Page 10

Additional Safety Instructions

Page 12

GETTING STARTED

Page 15

Unpacking

Page 15

Items Supplied

Page 15

Additional Accessories

Page 16

Machine Overview - EVOMAG28

Page 17

Machine Overview - EVOMAG50

Page 18

Machine Overview - EVOMAG75

Page 19

Assembly and Preparation

Page 20

Gear Selection

Page 20 + 22

Pre Use Testing

Page 22

Installing An Annular Cutter

Page 23

Setting Up

Page 24

Coolant/Lubricant Delivery

Page 24

General Guidance

Page 25

Installing A 3 Jaw Chuck

Page 25

Tapping

Page 27

MAINTENANCE

Page 28

Adjusting The Gibs

Page 28

DECLARATION OF CONFORMITY

Page 30

Содержание EVOMAG 28


















































Отзывы: