Customer Service 1•800•787•6649
9
Prepare for Your New Spa
120V to 240 V
Conversion
(Plug & Play Models
only)
(North America 60hZ)
Some spa owners choose to have their spa con-
verted from 120V operation to 240V operation for
greater energy efficiency.
WARNING: The electrical circuit must
!
be installed by a licensed electrical con-
tractor and approved by a local building
or electrical inspector. Customer must provide a
disconnect in the fixed wiring.
Failure to comply with state and local codes
may result in fire or personal injury and will be
the sole responsibility of the spa owner.
The steps to converting your spa from 120V
to 240V operation are shown below and must
be completed by a licensed electrician.
Power supply installation must include a properly
rated GFCI circuit breaker. The circuit must be dedi-
cated and should not be shared with any other ap-
pliances. It should be labeled and easily accessible to
users. The power supply must be hard wired into
the power pack. A hole may be drilled through the
spa cabinet near the electrical pack to accommo-
date wiring. Foam insulation may be sprayed around
the hole to fill any gaps between the cabinet and the
wiring.
Step 1.
Remove power
from the spa
Step
2
.
Disconnect jumper
from WHT AC.
Step
3
.
Disconnect other end of same
jumper from RED AC.
DO NOT DISCONNECT ANY OTHER
JUMPERS!
Note: All connectors in WHT AC are
interchangeable and the same is true of
all connections in RED AC.
