20
Operate Your Spa
4.Steam Loss/Venting Around Spa
Cover
- It is normal to see an occasional burst of steam
from around the cover due to pressure releasing
from a high to low area. However heat loss can
be greatly impacted by use of the spa
- Control valves should be turned off when getting
out of the spa in a cool climate.
- Air injects from the cabinet and enters into the
water area. That air not only will cool the cabinet
area, but will also greatly in-crease the pressure
under the cover and cause more steam to release.
- Surfaces are different for all spas, and cov-ers
may provide a better seal is spun differently.
- If the folding seam goes over the controller area,
often more steam will be able to es-cape. Try to
position the cover so that the fold seam goes over
the wider top surface areas on the adjacent sides.
Proper Spa Cover Use
Important! Keep the spa covered when not in use!
- Covered spas will use less electricity in maintaining
your set temperature.
- Covering your spa will protect your spa’s finish from
the sun’s ultraviolet rays.
- You are required to keep the spa covered to main-tain
warranty coverage.
- Covering your spa helps prevent children from
drowning in the spa. See the photo for instructions on
mounting the locks and how to lock and unlock the
cover.
- In addition, while a soft spa cover is rigid, it is not
designed to support any weight. Therefore, as a safety
precaution and to preserve the life of your cover, you
must not sit, stand, or lie on it, nor should you place
objects of any kind on top of it.
Economy
is the power saving alternative for
regular heating, you will know that you are in
economy by the code displayed. If the pump is
running the current temperature and code will
alternate on the display.
- Spa will only heat during filter period
- Temperature will remain close to desired, but it
will drop between filter periods
- If users can get in a routine, filter period should
overlap the usage time by a half hour. This will
have spa temperature closest to the desired
temperature.
- Example, if using the spa at 8:00 have spa filter
from 6:30 – 8:30.
- Best used in mild to warm climates
- Tests show a 20% reduction in energy con-
sumption when compared to standard mode
Sleep
is considered a vacation heater setting,
and will maintain your spa water at the most
affordable price.
- Spa will only heat during your filter period.
- The water temperature may drop up to 20
degrees below your desired temperature.
- Will work in all climates, and will not allow the
spa to freeze.
- Tests show a 50%+ reduction in energy
consumption when compared to standard mode.
Personal Settings
Jets
Most jets in your spa are ad-
justable. Rotating the face of an
adjustable jet
to the left
(counter-clockwise) will increase
the amount of water flow
through the jet. Rotating the face
of an adjustable jet to the right (clockwise) will de-
crease the amount of water flow through the jet.
Neck jets
can
be turned on
and off using
the nearby
water on/off
knob
.
Blower jets
are not adjustable,
but can be turned on and off using
the
Aux
or
Option
button on
your Control Panel.
