EVOC ec3-1813cld2na, Руководство пользователя

Страница: 97 / 123

BIOS Setup
· 30 · EC3-1813CLD2NA(CHENGDU)
 Spread Spectrum Control
This option is used to control spread spectrum function of clock signals.
 Chipset
BIOS SETUP UTILITY
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may
cause system to malfunction.
North Bridge Chipset Configuration
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter [PCI/IGD]
Boot Display Device [CRT+LVDS]
Flat Panel Type [640x480]
User Define Panel Type [Disabled]
South Bridge Chipset Configuration
Onboard Audio Controller [Enabled]
←→ Select Screen
↑↓ Select Item
Enter Go to Sub
Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (c)Copyright 1985-2006, American Megatrends, Inc.
 DRAM Frequency
To configure DRAM frequency. It is recommended to use automatic mode here.
Manually changing the configuration may lead to failure of boot-up because it is
not supported by DRAM.
 Configure DRAM Timing by SPD
BIOS configures the timing of SDRAM memory according to the content on the
SPD chip. Most memory modules have a small chip, or SPD chip, which saves
memory timing, capacity, and other parameters
 Initiate Graphic Adapter
This option is used to specify prioritized graphic device type for boot-up.