Evinox ModuSat XR ECO CHHC, Руководство пользователя

Страница: 11 / 35

11 2551868A
INSTALLATION
The Evinox combined heating, hot water and cooling unit must be installed, commissioned and
maintained by qualified and competent personnel in accordance with this document as well as
national regulations and standards.
Handling

The unit should be moved into position before lifting still within its packaging to prevent any
damage whilst being positioned. Only once it is safely situated, the unit should be removed
from its packaging and lifted into position.

The ModuSat® unit may have been transported and handled many times prior to the
installation, therefore it is vitally important that all unions and connections are checked and
tightened as required. In case of damage please contact Evinox Energy on 01372 722277.

Packaging materials must be disposed in accordance with the requirements of the
construction site or the property.
Lifting.
Take care when lifting this appliance. It is recommended that at least two people
perform the lifting.
Leave caps over the connections.
Ensure that the protective cover (caps) over the ModuSat® pipe connections are
kept in place to prevent ingress of any debris.
Positioning
The heat interface unit should be installed in a sheltered environment and is not suitable for outdoor
installation. It is recommended that the surrounding environment conditions do not exceed 40 °C
with the relative humidity from 15% to 85%.
Note: As the unit contains water, to operate, it is recommended not to place electrical devices, such
as control boards and other devices, underneath the unit in the case of a water leak. The
manufacturer cannot accept any responsibility for goods damaged in such a way.
Maintenance space.
It should be ensured that a sufficient space around the unit is provided to allow
the future maintenance and servicing of the unit. The removal of the front panel
should not be restricted. See section 2.5 for the minimum space requirements