EVGA Z790 DARK K|NGP|N (121-RL-E799)
- 11 -
1.
Multi-function Display
a.
During boot it will cycle many different hexadecimal post codes with a
range of 00-FF and this indicates what aspect of the Power On Self Test
(POST) is currently running.
i.
For a list of POST Codes, please see Page 116.
b.
This display can be configured in BIOS to display HW monitoring
information, such as voltage or temperature. After boot, the display will
show temperatures or voltage, depending on the BIOS configuration.
2.
Power Button
a.
RED: Motherboard is turned on and running.
3.
Reset Button
a.
WHITE: Reset button will typically flash in conjunction with HDD/SSD
LED. Depending on load, the button may flash or appear solid at times.
4.
Memory DIMM 1 Status
a.
OFF: DIMM detected and present
b.
RED: DIMM/Memory has failed POST
5.
Memory DIMM 2 Status
a.
OFF: DIMM detected and present
b.
RED: DIMM/Memory has failed POST
6.
CATERR - Catastrophic Error on the processor
a.
RED: Processor error has occurred.
b.
OFF: No error state detected in the CPU.
7.
SW Slow Mode ON
a.
RED: Slow Mode switch has been set to enabled
1.
Multi-function Display
12.
PE1 Status
23.
+5VSB Status
2.
Power Button
13.
PE2 Enabled
24.
VCORE Status
3.
Reset Button
14.
PE2 Status
25.
CPU VCCIN AUX Status
4.
Memory DIMM 1 Status
15.
PE3 Enabled
26.
CPU VDD2 Status
5.
Memory DIMM 2 Status
16.
PE3 Status
27.
CPU 1.05V Status
6.
CATERR
17.
M.2 Key-M M.2_1 Enabled
28.
CPU 1.8V Status
7.
SW Slow Mode ON
18.
M.2 Key-M M.2_1 Status
29.
PCH 1.05V Status
8.
BIOS 1 Active
19.
M.2 Key-M M.2_2 Enabled
30.
PCH 0.82V Status
9.
BIOS 2 Active
20.
M.2 Key-M M.2_2 Status
31.
PCH 1.8V Status
10.
BIOS 3 Active
21.
M.2 Key-M M.2_3 Enabled
32.
+12V Status
11.
PE1 Enabled
22.
M.2 Key-M M.2_3 Status
33.
CMOS CLS/BIOS Button
12.
PE1 Status
24.
VCORE Status
LED Legend
