EVGA Z690 CLASSIFIED (121-AL-E698)
- 10 -
1.
Multifunction POST Indicator
a.
During boot it will cycle through different hexadecimal post codes with
a range of 00-FF, indicating the status of the Power On Self-Test (POST).
i.
For a list of POST Codes, please see Page 154.
b.
This indicator can be configured in BIOS to display hardware monitoring
information, such as voltage or temperature. After boot, these LEDs will
show either temperature or voltage, depending on user configuration in
the BIOS.
2.
Reset Button
a.
WHITE: Reset button will typically flash in conjunction with HDD/SSD
LED. Depending on load, the button may flash or appear solid at times.
3.
Power Button
a.
RED: Motherboard is turned on and running.
4.
VCORE Status
a.
WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
5.
CPU VCCINAUX Status
a.
WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
6.
CPU VDD2 Status
a.
WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
7.
CPU 1.05V Status
a.
WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
8.
CPU 1.8V Status
a.
WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
9.
PCH 1.05V Status
a.
WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
1.
Multi-function POST indicator
6.
CPU VDD2 Status
11.
PCH 1.8V Status
2.
Reset Button
7.
CPU 1.05V Status
12.
+5V Standby Status
3.
Power Button
8.
CPU 1.8V Status
13.
CATERR
4.
VCORE Status
9.
PCH 1.05V Status
14.
BIOS Active Indicator LEDs
5.
CPU VCCINAUX Status
10.
PCH 0.82V Status
15.
CMOS CLS/BIOS Button
LED Legend
