EVGA Z490 FTW, Руководство пользователя

Страница: 97 / 163

EVGA Z490 FTW (122-CL-E497)
- 97 -
Next, select “Configure SLI, Surround, PhysX” under the “3D Settings” menu. The
default is “Disable SLI.”
To enable SLI, click “Maximize 3D Performance,” circled in red b elow, and click
“Apply” at the bottom.
Before you can enable SLI, the NCP may ask you to close certain programs and
processes; you cannot continue further until this is completed.
At this point the display may go black a few times, or appear to change resolution and
back again quickly; this is normal. Also, if you are running a G-Sync monitor, it will turn
off and on during this process, which may take between 5-20 seconds, approximately.