EVGA Z490 FTW (122-CL-E497)
- 58 -
The Good-
•
RAID1 allows you to suffer a catastrophic failure of 1 drive with no ill effects to
the data being stored.
•
Because data is stored on 2 drives at once, read speeds typically increase a little,
but not to the speed of RAID5 and, certainly, not to the speed of RAID 0.
The Bad-
•
RAID1 is not a storage capacity-friendly array, because the capacity will be
limited to 1 drive.
o
Due to the capacity available on modern drive solutions, this issue may
not be as significant as it once was.
•
Write speed will be a bit lower than a single drive.
In the charts below, you can see the effect of fault tolerance when using a mirror array:
because all data has a direct 1-to-1 duplicate on the mirrored drive, you can suffer a
catastrophic failure of a drive and still retain your data.
For a RAID1 array to lose its data, both drives must fail.
RAID5
: RAID5 is a stripe with Fault Tolerance, which attempts to bridge the gap
between speed and redundancy. This level will always reserve a capacity equivalent to
one drive for fault tolerance, regardless of the overall capacity. This means that if you
P-DRIVE1
P-DRIVE2
P-DRIVE1
P-DRIVE2
DATA-A
DATA-A
DATA-A
DATA-A
P-DRIVE1
P-DRIVE2
P-DRIVE1
P-DRIVE2
DATA-A
DATA-A
DATA-A
DATA-A
L-Drive = DATA-A
L-Drive = DATA-A
L-Drive = DATA-A
L-Drive = DATA-A
L-DRIVE =
≃
1TB
RAID 1 (2 Drive)
Содержание Z490 FTW
Страница 1: ...EVGA Z490 FTW 122 CL E497 1 User Guide EVGA Z490 FTW Specs and Initial Installation...
Страница 77: ...EVGA Z490 FTW 122 CL E497 77...
Страница 83: ...EVGA Z490 FTW 122 CL E497 83 Select the drive you wish to use for the repair and click the Rebuild button...
Страница 152: ...EVGA Z490 FTW 122 CL E497 152...
