EVGA B360 Micro Gaming (112-CS-E365)
- 27 -
Moreover, if the device’s connection looks like this, then screwing down the device may
be impossible (a VERY tight fit, at best), which is another sign that the device is not
seated properly.
In conclusion, if the install device looks similar to the image below, please remove and
reseat it using the instructions above.
DO NOT POWER THE SYSTEM ON IF
THE CONNECTOR RESEMBLES THIS PICTURE
.
For further M.2 SSD setup instructions, please see Page 43
Installing M.2 Key-E Socket 1 Devices
M.2 Key-E Socket 1 slots are used to install WiFi or Bluetooth cards. Although the
orientation of the slot(s) may vary on different motherboards, the B360 Micro Gaming
uses a horizontal adapter near the I/O ports. Please see Page 10 to locate the slot.
The B360 Micro Gaming accessories include a screw attached to the box, which may be
used to secure your M.2 Key-E Socket 1 device. The M.2 Key-E 32mm device is not
included with the B360 Micro Gaming, and must be purchased separately.
EVGA recommends that you install your M.2 Key-E device prior to installing your
motherboard into your chassis.
