EVGA 132-CK-NF79, Руководство пользователя

Страница: 38 / 127

Hardware Installation
EVGA Corporation
January 11, 2008 | DU-03751-001_v01
27
Jumper Settings
The motherboard contains a 3-pin BIOS configuration jumper that enables
all board configurations to be done in the BIOS Setup program.
The silk screen on the motherboard shows a
∆ next to pin 1.
Clear CMOS Jumper: CLR_CMOS
The motherboard uses the CMOS RAM to store all the set parameters.
The CMOS can be cleared by removing the CMOS
jumper.
Use the following procedure to clear CMOS:
1.
Turn off the AC power supply
2.
Connect pins 1 and 2 together using the jumper cap.
3.
Return the jumper setting to normal (pins 2 and 3
together with the jumper cap).
4.
Turn the AC power supply back on.
Pin 1
Card
Edge