EVGA 132-CK-NF79, Руководство пользователя

Страница: 23 / 127

nForce 790i Ultra SLI Motherboard
EVGA Corporation
12
January 11, 2008 | DU-03751-001_v01
Use the following procedure to install memory DIMMs. Note that there is
only one gap near the center of the DIMM slot. This slot matches the slot
on the memory DIMM to ensure the component is installed properly.
1.
Unlock a DIMM slot by pressing the module clips outward.
2.
Align the memory module to the DIMM slot, and insert the module
vertically into the DIMM slot. The plastic clips at both sides of the
DIMM slot automatically lock the DIMM into the connector.
Installing the Motherboard
The sequence of installing the motherboard into the chassis depends on the
chassis you are using and if you are replacing an existing motherboard or
working with an empty chassis. Determine if it would be easier to make all
the connections prior to this step or to secure the motherboard and then
make all the connections. It is normally easier to secure the motherboard
first.
Use the following procedure to install the I/O shield and secure the
motherboard into the chassis.
Note:
Be sure that the CPU fan assembly has enough clearance for the chassis
covers to lock into place and for the expansion cards. Also make sure the
CPU Fan assembly is aligned with the vents on the covers.
Installing the I/O Shield
The motherboard kit comes with an I/O shield that is used to block radio
frequency transmissions, protects internal components from dust and
foreign objects, and promotes correct airflow within the chassis.
Before installing the motherboard, install the I/O shield from the
inside of
the chassis. Press the I/O shield into place and make sure it fits securely. If
the I/O shield does not fit into the chassis, you would need to obtain the
proper size from the chassis supplier.