EVGA 132-CK-NF79, Руководство пользователя

Страница: 24 / 127

Hardware Installation
EVGA Corporation
January 11, 2008 | DU-03751-001_v01
13
Securing the Motherboard into the Chassis
Most computer chassis have a base with mounting studs or spacers to allow
the mother board to be secured to the chassis and help to prevent short
circuits. If there are studs that do not align with a mounting hole on the
motherboard, it is recommended that you remove that stud to prevent the
possibility of a short circuit. In most cases, it is recommended to secure the
motherboard using a minimum of nine (9) spacers.
1.
Carefully place the motherboard onto the studs/spacers located inside
the chassis.
2.
Align the mounting holes with the studs/spacers.
3.
Align the connectors to the I/O shield.
4.
Ensure that the fan assembly is aligned with the chassis vents according
to the fan assembly instruction.
5.
Secure the motherboard with a minimum of eight-to-ten screws.
Connecting Cables and
Setting Switches
This section takes you through all the connections and switch settings
necessary on the motherboard. This will include:
‰
Power Connections
¾ 24-pin ATX power (
PWR1
)
¾ 8-pin ATX 12V power (
PWR2
)
‰
Internal Headers
¾
Front panel
¾
IEEE 1394a
¾
USB Headers
¾
Audio