evertz HDSD9545DLY-PRO Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 64

background image

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature ac-companying the product.

•

Read this information

•

Keep these instructions.

•

Heed all warnings.

•

Follow all instructions.

•

Do not use this apparatus near water

•

Clean only with dry cloth.

•

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

•

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

•

Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles and the point where they exit from the apparatus.

•

Only use attachments/accessories specified by the manufacturer

•

Unplug this apparatus during lightning storms or when unused for long periods of time.

•

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.

WARNING

DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT.

WARNING

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.

WARNING

THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

«
1
2
3
4
5
...
»

Содержание HDSD9545DLY-PRO

































































Отзывы:

Нет отзывов

Похожие инструкции для HDSD9545DLY-PRO

Бренд: XDS Страницы: 99

Бренд: TC-Helicon Страницы: 2

Бренд: Ebyte Страницы: 14

Бренд: Ruckus Wireless Страницы: 102

IAR KickStart Kit TWR-K60N512-IAR

Бренд: IAR SYSTEMS Страницы: 8

Бренд: Xantech Страницы: 4

Бренд: Corsair Страницы: 10

Бренд: NetBurner Страницы: 30

Total Access 1500 Dual FXS/DPO

Бренд: ADTRAN Страницы: 2

Q-SYS QIO-GP8x8

Бренд: QSC Страницы: 13

PCI4-AD-x16HI-BG4

Бренд: Serial Cables Страницы: 15

Бренд: Moxa Technologies Страницы: 8

Бренд: Sony Ericsson Страницы: 2

Бренд: ICP DAS USA Страницы: 26

Бренд: National Instruments Страницы: 147

Бренд: Cypress Semiconductor Страницы: 31

Бренд: 4ms Company Страницы: 4

Бренд: Motorola Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды