7800 Multiframe Manual
7825DSK2-LG(-HD)(-3G) 3G/HD/SD Dual Downstream Keyer
Page 5-6
Revision 2.0
RCP OPERATION
5.2. OVERVIEW OF FRONT REMOTE CONTROL PANEL OPERATION
5.2.1.
Displaying Logos
To control whether a logo is keyed or not, you must first enable the media key layer by pressing the
LOGO
button for the bus you want the logo to appear on. The
LOGO
LED for the respective bus must
be illuminated for logos to display on that bus. Scroll to the logo required using the
&
buttons. If
the logo is currently being keyed its name will flash in the front panel display. To key the logo into the
output video buses with the media layer enabled, press the
LOGO IN/OUT
button. The logo will fade
in according to its programmed fade in time and the logo name display will begin flashing. If the logo is
not currently loaded into memory, a progress indicator will appear to the right of the logo name while it
is loading into memory. To remove a keyed logo from the output video buses, press the
LOGO
IN/OUT
button when the logo name is flashing. The logo will fade out according to its programmed
fade out time and the logo name display will stop flashing.
5.3. AN OVERVIEW OF THE SETUP MENU SYSTEM
The
SETUP
menu system uses the 16 digit alphanumeric display and provides a quick, intuitive
method of configuring the 7825DSK2-LG(-HD)(-3G). These items are often only required to be set up
at the time of installation, and do not pertain to the day-to-day operation of the unit. Figure 5-3
provides an overview of the
Setup
menu system.
5.4. NAVIGATING THE SETUP MENU
To enter the
Setup
menu, press the
SETUP
button. This will bring you to the main
Setup
menu where
you can use the
&
buttons to move up and down the list of available sub-menus. Once you have
chosen the desired sub-menu, press the
SELECT
button to select the next menu level.
Once in a sub-menu, there may be another menu layer, or there may be a list of parameters to adjust.
If there is another set of menu options, use the
&
buttons to select the desired menu item and
press the
SELECT
button. Continue this process until you get to the bottom of the menu tree where
the list of parameters to be adjusted is shown.
To adjust any parameter, use the
&
buttons to move up or down the parameter list to the desired
parameter. To view the possible values for that item, press the
SELECT
button. The current value for
that parameter will be shown with an asterisk (*). Pressing the
&
buttons allows you to show the
possible values for the selected parameter. The various parameter values that are not currently
selected will NOT have an asterisk (*). When you have stopped at the desired value, press the
SELECT
button to save your selection. The value will be shown with an asterisk (*), indicating that it is
now the current value. To move up one level in the menu press the
SETUP
button.
You can select other parameters from that sub-menu by using the
&
buttons, followed by the
SELECT
button. Alternately you can move up one menu item by pressing the
SETUP
button.
When you have made all the desired changes, press the
SETUP
button one or more times until you
return to the top of the Menu tree and exit the
Setup
menu.
Each of the menu items, with function explanations, is described in the following sections.
Содержание 7825DSK2-LG-3G
Страница 2: ...This page left intentionally blank ...
