evertz 7825DSK2-LG-3G, Инструкция по эксплуатации

Страница: 167 / 176

7800 Multiframe Manual
7825DSK2-LG(-HD)(-3G) 3G/HD/SD Dual Downstream Keyer
APPENDIX A
Revision 2.0
Page 10-3
Audio channel setups are handled as an object configuration:
object bus_setup ("1") {
object channel ("1L") {
source = "AEMB1L" gain = 0 router = "1" }
object channel ("2R") {
source = "Silence" gain = 0 router = "none" }
object channel ("4L") {
source = "AEMB4L" gain = 0 router = "12"}
}
The values for the router property are "1", "2", ..., "12", "none". One router property is needed for each
channel pair (the latter one overwrites the first if different router values are specified for both left and
right channels).
This example sets the output audio channel 1L to the AES discrete input 1L, which is the first channel
of the first AES BNC in the program BNC block on the rear of the unit. This input will be active
whenever you select the Bkg/A from the front panel, gpi or automation. This will also be the source for
the background audio when the unit is in DSK mode.
10.1.1. Scripting Object Syntax
object TYPE (name) {
object TYPE (name)
PROPERTY = value
command
}

Note: ‘obj’ can be used in place of object
Defined TYPE
bus_setup
channel
router
transition
matte
key
audio
source
misc
Defined PROPERTY
pgm_source
PRV_source
key_source
fill_source
type
swap
rate
enable
top