4
33
Eversense CGM User Guide
3.
To link the smart transmitter and sensor, tap
Link Sensor
on either the
New Sensor
Detected
pop-up screen or by tapping
Menu
>
Settings
>
System
>
Linked Sensor
and
then tap
Link Detected Sensor
.
Note:
It may take
up to 5 minutes for the
New Sensor Detected
notification to be
displayed.
If the smart transmitter
is removed from
the sensor site, the
system will display a
notification.
4.
The linking process will begin. Each step will show
a check mark when finished. It may take up to
10 minutes for the process to complete. DO NOT
remove the smart transmitter from your insertion
site until the third check mark is displayed.
Precaution:
The sensor and smart transmitter
should be linked the day of the sensor insertion.
Failure to link the sensor and smart transmitter
could result in a delay in receiving glucose readings.
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 33
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 33
2/26/20 12:58 PM
2/26/20 12:58 PM
