Everlasting PROFESSIONAL TRAY 05 P, Руководство по эксплуатации и обслуживанию, Страница: 3 / 52

3
ENGLISH
The main general safety standards are listed below:
- Do not use or place electrical devices inside the refrigerated compartments if they are not of the
type recommended by the manufacturer
- Do not touch the blast chiller with damp or wet hands or feet
- Do not use the blast chiller barefoot
- Do not insert screwdrivers or other objects between the guards or moving parts
- Do not pull the power cord to unplug the blast chiller from the electricity network
- The blast chiller is not intended to be used by persons (including children) with physical or mental
problems, or lack of experience and knowledge, unless they are controlled or instructed in using the
unit by a person responsible for their safety. Children must be supervised to ensure that they do not
play with the appliance.
- Before carrying out any cleaning or maintenance, disconnect the blast chiller from the mains power
supply by turning off the main switch and pulling the plug
- In the event of failure and/or malfunction of the blast chiller, turn it off and to refrain from any attempt
to repair or intervene directly. It is necessary to exclusively contact a qualified technician.
Blast chiller model PROFESSIONAL TRAY is composed of a modular single body insulated with
expanded polyurethane with 42 kg/m3 density, internally covered in Stainless Steel AISI 304 and
externally by different materials.In the design and construction, all measures have been adopted to
ensure a blast chiller that complies with safety and hygiene requirements, such as: rounded inte-
rior corners, deep drawing with drain on the outside for the condensate liquids, no rough surfaces,
fixed guards on moving or dangerous parts. The products must be stored in observance of the
load limits given in the table, in order to ensure an efficient circulation of air inside the blast chiller.
Load capacity BLAST CHILLERS PROFESSIONAL TRAY
PROFESSIONAL TRAY
Capacity
Mod.
GN 1/1
Nr° Nr° Nr°
PROF. TRAY 05
5
Passo 70 mm.
6 2 6
Passo 52,5 mm.
9
Passo 35 mm.
PROF. TRAY 07
7
Passo 70 mm.
9 3 9
Passo 52,5 mm.
13
Passo 35 mm.
PROF. TRAY 10
10
Passo 70 mm.
12 4 13
Passo 52,5 mm.
19
Passo 35 mm.
PROF. TRAY 15
15
Passo 70 mm.
18 6 20
Passo 52,5 mm.
30
Passo 35 mm.
PROF. TRAY 20
21
Passo 70 mm.
24 8 27
Passo 52,5 mm.
41
Passo 35 mm.
The installation must be performed exclusively by a qualified technician