Everlasting PROFESSIONAL TRAY 05 P, Руководство по эксплуатации и обслуживанию, Страница: 26 / 52

26
ENGLISH
LEAVENING phase
Temperature adjustment is active and it is NEUTRAL ZONE; temperature is determined by end
users. The passage from proofing temperature (previous phase) to leavening temperature can be
gradual. Relative humidity adjustment is active and it is NEUTRAL ZONE; humidity is determined
by end users.
Phase duration in hours and minutes and evaporator fan speed are determined by end users.
DELAY phase (Conservation)
Delay phase is always activated, but it can be deactivated (both at cycle setting and with running
cycle) by end users. In this case the appliance will be in STAND-BY at the end of leavening.
Temperature adjustment is active and it is NEUTRAL ZONE; temperature is determined by end
users.
Relative humidity adjustment is active and it is NEUTRAL ZONE; end users can determine both
humidity and evaporator fan speed.
Phase duration is either adjustable in time or endless, i.e. it ends when cycle is interrupted by
pushing the
STOP
key.
9.7.9 PRETARDING-PROOFING CYCLE setting
- Cycle start and stop
-40 °C
-20 °C
--- h
CHILLING
SANIFICATION
START
-20 °C
-20 °C
24 hour
HOLDING
SANIFICATION
START
-20 °C
--- °C
--- h
CONSERVATION
SANIFICATION
START
-15 °C
8 °C
-40°C
-20°C
13:35
1/3 115 min IN PROGRESS...
STOP
SANIFICATION
-15 °C
24 h
-20°C
24 h
13:35
2/3 IN PROGRESS...
STOP
SANIFICATION
-22 °C
-20°C
13:35
3/3 CONSERVATION V
STOP
SANIFICATION
13:35
SPECIAL CYCLES
UV
DEFROST
SANITATION
HARDENING DRYING
CHOCOLATE STERILIZATION
THAWING RETARDER PROOFERS SLOW COOKING
Push the key to access the following screen, displaying the phases of a
RETARDING-PROOFING
cycle:
- Block
- Storage
- Proofing
- Leavening
- Delay
Cycle is started by pushing on the
START
key and it ends
automatically at the end of pgase 4 and according to the set end time,
with an acoustic signal.
-10 °C
--- %
02:30 h
PHASE 1 - CHILLING
13 °C
80 %
Phase 5/5 CONSERVATION
STOP
13:35
13 °C
80 %
13 °C
80 %
Phase 4/5 ENDED
STOP
13:35
28 °C
80 %
1 °C
- - %
Fase 2/5 IN PROGRESS...
STOP
13:35
1 °C
-- %
-4 °C
- - %
Fase 1/5 IN PROGRESS...
STOP
04/03/19
05:00
Monday
end
cycle
13:35
-4 °C
-- %
RETARDER PROOFERS
END CYCLE:
Monday 04/03/19 05:00
PHASE 1
-10 °C
--- %
02:30 h
Monday 04/03/19
05:00
END CYCLE
13:35
CICLI SPECIALI
SBRINAMENTO
UV
SANIFICAZIONE
INDURIMENTO ASCIUGATURA
CIOCCOLATO STERILIZZAZIONE
SCONGELAMENTO FERMALIEVITA LENTA COTTURA
START
RETARDER PROOFERS
04/03/19
05:00
Monday
end
cycle
In case set end time is later than the sdum of each phase time, the
controller will automatically increase storage time (phase 2) to fill in the
time gap.
Manual interruption can be carried out in any phase by pushing the key
STOP
for 4 seconds.
Note: phase 5 (delay) is optional and does not include duration
settings; therefore, if activated, it will end automatically aftger the set
duration, which can also be endless, is elapsed. In this case, it can only
be ended by pushing the
STOP
key.
- If phase 5 is not activated, the cycles ends and the STAND-BY screen
is displayed
-10 °C
--- %
02:30 h
PHASE 1 - CHILLING
13 °C
80 %
Phase 5/5 CONSERVATION
STOP
13:35
13 °C
80 %
13 °C
80 %
Phase 4/5 ENDED
STOP
13:35
28 °C
80 %
1 °C
- - %
Fase 2/5 IN PROGRESS...
STOP
13:35
1 °C
-- %
-4 °C
- - %
Fase 1/5 IN PROGRESS...
STOP
04/03/19
05:00
Monday
end
cycle
13:35
-4 °C
-- %
RETARDER PROOFERS
END CYCLE:
Monday 04/03/19 05:00
PHASE 1
-10 °C
--- %
02:30 h
Monday 04/03/19
05:00
END CYCLE
13:35
CICLI SPECIALI
SBRINAMENTO
UV
SANIFICAZIONE
INDURIMENTO ASCIUGATURA
CIOCCOLATO STERILIZZAZIONE
SCONGELAMENTO FERMALIEVITA LENTA COTTURA
START
RETARDER PROOFERS
04/03/19
05:00
Monday
end
cycle