6
ENGLISH
The following are the measures taken to protect against other risks:
-
electricity:
The blast chiller has been designed, built and equipped so as to prevent risks from
electricity, in accordance with the specific legislation in force
-
noise:
The blast chiller has been designed and built in such a way that risks resulting from the
emission of airborne noise are reduced to the minimum level
8.1 safety devices adopted
It is absolutely forbidden (Fig. 2) :
- to tamper with or remove the closing panels of the monocondensing unit
- remove the labels applied describing the technical characteristics (1) and the warnings for grounding
of the blast chiller
- remove the labels applied describing the technical characteristics and the warnings for grounding
of the motocondensing unit
- remove the label of the blast chiller which warns the user to turn off the power supply before working
on the unit
- remove the label of the remote motocondensing unit which warns the user to turn off the power
supply before working on the unit
- to remove the labels applied on the blast chiller indicating grounding
- to remove the labels applied on the remote motocondensing unit indicating grounding
- to remove the label applied on the power cord, indicating the type of power supply (2)
The manufacturer declines any responsibility for the safety of the blast chiller if this were to happen.
1
2
1
2
Fig.2
8.2 Indications for optimal operation
- do not block the air vents of the remote motocondensing unit
- place the foodstuffs on the appropriate shelves or containers. Do not place them directly on the
bottom, or leaning against the walls, doors or fixed guards
- close the doors carefully
- always keep the defrost water drain hole clear of obstructions
- limit, to the extent possible, the frequency and duration of door opening. Each opening causes a
change in the internal temperature
- perform periodically current maintenance (see chapter 3)
