EverFocus PARAGON 264x4-16, Инструкция по эксплуатации

Страница: 55 / 134

49
5.3.5 Video Loss
Figure 5-7 Camera Menu – Video Loss
Camera: Select the camera you wish to adjust, “Title” will change to the title name of the selected camera.
Enable: Check box to enable Video Loss.
Log: Check box to record video loss events in the log.
Pre-alarm Record: Check the box to record several moments (approx. 2 ~ 10 seconds) before the video
loss event. The pre-alarm recording rate follows the “ Normal ” frame rate setting (Camera Menu).
Buzzer: Check box to enable buzzer when a video loss event occurs.
Email Notify: Check box to enable email notification when a video loss event occurs.
Network Alarm: Check box to send out a network alarm to client PC when a video loss event occurs. (This
function requires the optional PowerCon 4.x network management software as well as setting up the alarm
server in the Network Setup menu)
Alarm Output: This will transmit a signal through one of the alarm outputs. It can be set to either “ NONE ”
(not active), “ 1 ”, “ 2 ”, “ 3 ”, or “ 4 ”.
Output Type: Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will remain active until user presses “
Enter ” key on front panel.
Transparent: Alarm output continues as long as there is a video loss.
Trans+Timeout: Alarm output continues until event ends, then lasts for the set time duration.