ENVR8304D-8CH / ENVR8304E-8CH
112
6.8
System Setting
You can configure the general settings for the NVR in this menu.
6.8.1
Date/Time
You can set up the date and time for the NVR.
Figure 6-54
Date:
Click to
bring up the on-screen keyboard to set up the date.
Time:
Click to bring up the on-screen clock to set up the time.
Date Format:
Select a date format from the drop-down list.
Time Format:
Select a time format from the drop-down list.
Time Zone:
Select a time zone for the NVR to adjust to when updating from the time
server.
NTP:
Select Disable / Enable for NTP time synchronization.
NTP Server:
Displays the time server address that the NVR uses for time synchronization.
Requires operating network configuration and WAN or LAN access to a compatible NTP
server. The default NTP address is the NTP server in Taiwan. To find a compatible NTP
address of the NVR’s physical location, follow the steps below:
a.
Use a computer connected to the Network.
b.
Click Start > Run > type “command” and then click OK.
c.
In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP
Server.
Содержание ENVR8304D
Страница 127: ...ENVR8304D 8CH ENVR8304E 8CH 118 Figure 6 59...
