EMV800 HD / EMV1200 HD Mobile DVR
86
Trans+Timeout: Alarm output continues until event ends, then continues for the set
time duration.
Timeout Duration:
The amount of time the buzzer sounds when GPS event occurs.
【
GPS Fencing
】
: You can set up the geo-fencing event for alarm notification.
GPS Alarm:
Select On / Off to enable / disable GPS Fencing alarm.
GPS Border Type:
Select
Circle
or
Rectangle
for the GPS border type.
Coordinate Express:
Select
DMS
to set up the latitude and longitude of the border in Degrees
/ Minutes / Seconds; or select
Decimal Degrees
to set up the border in decimal degrees.
If you select
Circle
in the GPS Border Type field, the following settings will appear:
Center Latitude:
Select S (South) or N (North) and then set the latitude.
Center Longitude:
Select E (East) or W (West) and then set the latitude.
Radius:
Select radius value from kilometer (Km) or mile (Mi).
If you select
Rectangle
in the GPS Border Type field, the following settings will appear:
Upper Left Latitude.:
Select S (South) or N (North) and then set the latitude.
Upper Left Longitude:
Select E (East) or W (West) and then set the latitude.
Lower Right Latitude:
Select S (South) or N (North) and then set the latitude.
Lower Right Longitude:
Select E (East) or W (West) and then set the latitude.
【
GPS Speed
】
: You can display the vehicle speed on the live view / recordings or to set up
the higher speed limit event for alarm notification.
GPS Speed:
Select whether to display the vehicle speed or not.
Speed Higher Limit:
Set the vehicle speed to determine at which level the alarm will be
triggered. Once the vehicle reaches the setup speed, the alarm will be triggered.
Speed Unit:
Select
KPH
(kilometer per hour) or
MPH
(mile per hour) to display the vehicle
speed on live view or recordings.
Save:
Click to save the settings.
