EMV800 HD / EMV1200 HD Mobile DVR
125
6.8
System Setting
You can configure the general settings for the mobile DVR in this menu.
6.8.1
Date / Time
You can set up the date and time for the mobile DVR.
Note:
Clicking
Save
at this page will disable the
Daylight Saving
function if this function has
been enabled. Therefore, after setting up the time at this page, you need to go to
Daylight
Saving
page to reset and enable the daylight saving time if the function is needed. Please
refer to
6.8.2 Daylight Saving
for detailed information.
Date:
Click to
bring up the on-screen keyboard to set up the date.
Time:
Click to bring up the on-screen clock to set up the time.
Date Format:
Select a date format from the drop-down list.
Time Format:
Select a time format from the drop-down list.
Time Zone:
Select a time zone for the mobile DVR to adjust to when updating from the time
server.
Time Sync:
You can synchronize the MDVR time with NTP server or GPS time.
Disable: Select to disable the time synchronization function.
NTP: Select to synchronize the MDVR time with NTP server. You will have to further set up
the
NTP Server
and
NTP Update Interval
settings below.
