75
4.10
S
YSTEM
S
ETTING
Figure 4-31 is a screenshot of the
SYSTEM SETTING MENU
. This menu is for setting up the general
system parameters for the DVR.
Figure 4-31 System Menu – Date/Time
4.10.1
Date/Time
Date:
Set current Date.
Time:
Set current Time.
Date Format:
Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.
Time Format:
Change time format between 12H and 24H mode.
Time Zone:
Set the time zone that the DVR adjusts to when updating from the time server.
NTP:
Select “Enable” or “Disable” NTP time synchronization.
NTP Server:
Displays the time server address that the DVR uses for time synchronization. Requires
operating network configuration and WAN or LAN access to a compatible NTP server.
To find a compatible NTP address, please follow these steps:
a) Go to a PC that is connected to the internet.
b) Click on “START” -> “RUN” -> type “command” and press “OK”.
c) In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.
NTP Update Interval:
The frequency that the system automatically updates the time via the NTP server.
Select Daily, Weekly, or Monthly.
