41
4.3.3
Motion
Figure 4-4 Camera Menu – Motion
Camera:
Select the camera you wish to configure. “Title” will change to the title name of the selected
camera.
Enable:
Check box to enable motion detection. Other motion options will not be available unless this
feature is selected.
Log:
Check this box to record motion events in the log.
Main Monitor:
Main monitor display options when a motion event occurs.
No change: No change on the main monitor display.
Full screen: A full screen of the event camera will display on the main monitor.
Pre-alarm Record:
Check box to start copying recorded video to the hard disk from 5 seconds before the
motion event. (Pre-alarm recording rate will follow the “
Normal
” frame rate setting)
Buzzer:
Check this box to enable the buzzer when a motion event is triggered.
Email Notify:
Check this box to send email notification when a motion event is detected. Email operation
requires that valid email settings have been entered in the Network Setting/Email setup screen. (See
Section 4.6.2 Email for more information.)
Network Alarm:
Check this box to send out a network alarm to a client PC when motion occurs. (This
feature requires PowerCon software on the client PC and proper settings for the Alarm Server in the
Network Setup menu; see Section 4.6.4 Alarm Server for more information.)
Alarm Output:
This will transmit a signal through the alarm output relay. It can be set to either “
NONE
” (not
active) or “
1
” (indicating which alarm relay is
active).
Output Type:
Output action when motion is triggered.
Timeout: Alarm output lasts for a set of time duration. If this option is selected, a field will appear for
setting the duration.
