EverFocus ECOR 264-4D2, Руководство пользователя

Страница: 30 / 124

24
3.5 PTZ
3.5.1 General PTZ control (if PTZ cameras are installed)
Right-click to bring up the menu bar and click on to display PTZ Controls .
The following actions can be performed using the PTZ Menu:
1. Use Direction Arrows (up, down, left, right) to move the camera to the desired direction
and angle.
2. To Zoom , Click “ Z+ ” to zoom closer or “ Z- ” to zoom farther away.
3. To Focus , click “ F+ ” to focus far or click “ F- ” to focus near.
4. With Iris , you can increase the amount of light by clicking “ I+ ” or decrease it by clicking “ I-
“.
5. To program a preset position (if supported by the camera)
a. Move PTZ camera to the specified position
b. Click “ Preset ” button
c. Click the number of the desired position (This will be displayed in the box)
d. Click “ Set ” button
6. To jump to a preset position
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Go ” button
7. Shortcut for presets #1-9
a. Click digit 1-9 button without clicking any other buttons
b. The camera will seek that preset position
8. Steps to delete a preset position (if supported by the camera)
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Delete ” button
9. For Auto Pan
a. Click “ Auto Pan ” button
10. Pattern Operation (Pattern is the “0” Tour in Everfocus and Pelco PTZ cameras)
a. Click “ Pattern ” button
11. Steps to run a tour
a. Click “ Tour ” button
b. Click the number of the desired tour
c. Click “ Go ” button
12. Steps to remove a tour (if supported by the camera)
a. Click “ Tour ” button
b. Click the number of the desired tour
c. Click “ Delete ” button
Click “
C ” to clear the digit in the number display
Click “ X ” at the top-right corner to hide the PTZ menu (see Express control below)
Click “ Exit ” to leave PTZ function.