Eventide Space Скачать руководство пользователя | Manualshive

Страница: 33 / 50

background image

Space User Guide Tempo

33

Tempo

Tempo ON/OFF

Tempo is turned ON or OFF by momentarily pressing the Tempo Button. When Tempo is ON,

the Tempo LED flashes at the Tempo rate. With Tempo OFF, the Tempo LED is OFF.

Tap Tempo

In Play Mode, the Tap Footswitch can be tapped to set the tempo. While tapping, the

Billboard displays the updated Tempo in BPM (beats per minute) if Tempo is ON. If Tempo is

OFF, the Tap Footswitch can be tapped to set the reverb decay time in seconds for Hall,

Room, Plate, Spring, DualVerb, Reverse, ModEchoVerb, TRemoloVerb and DynaVerb and the

pre-delay time in milliseconds for Blackhole, MangledVerb and Shimmer.

Note: When using an Aux Switch to tap tempo, the Billboard will display the tempo value in

both Play and Preset Modes.

Global Tempo

Tempo is always saved with each Preset. Often however, it can be useful to make the tempo

uniform for all of the Presets that you’re using. To do this, use the System GLOBAL TEMPO

command. When GLOBAL TEMPO is ON, the Tempo value saved with the Preset is ignored

and the current Tempo value is used for all Presets.

Turning GLOBAL TEMPO ON or OFF. The factory default is OFF.

1) Press and hold the Encoder and Right Footswitch simultaneously for a few seconds to

enter System Mode. Release the Encoder.

2) Turn the Encoder until [GLOBAL] is displayed.

3) Momentarily press the Encoder.

4) Turn the Encoder until [TEMPO] is displayed.

5) Momentarily press the Encoder.

6) Turn the Encoder to select [ON] or [OFF].

7) Press and hold the Encoder & Right Footswitch simultaneously to exit System Mode.

Fine-tuning Tempo and Parameters

Tempo

The Encoder can be used to set or tweak the Tempo value in BPM if Tempo is ON and in

milliseconds if Tempo is OFF. First press the Tap Footswitch once (you must be in Play Mode)

so that the Billboard displays the Tempo value. With the Tempo value displayed, the Encoder

can be turned to adjust the Tempo. While adjusting, the Billboard displays the updated

Tempo and the parameter Control Knobs are disabled. After a few seconds, Tempo tweaking

mode times out and the Control Knobs are enabled.

Parameters

The Encoder can also be used to tweak the parameter values. To use the Encoder, first turn

the Control Knob corresponding to the parameter that you want to tweak so that the value is

displayed by the Billboard. While the value is still displayed, turn the Encoder to adjust the

parameter. While tweaking, the Billboard displays the updated parameter value and the

parameter Control Knobs are disabled.

«
...
31
32
33
34
35
...
»

Содержание Space



















































Отзывы:

Нет отзывов

Похожие инструкции для Space

Бренд: Truetone Страницы: 2

Бренд: DOEPFER Страницы: 21

INFINITE MINI SAMPLE SUSTAINER

Бренд: TC Electronic Страницы: 17

Бренд: EarthQuaker Devices Страницы: 2

Бренд: Fulltone Страницы: 2

Бренд: Dateq Страницы: 40

VIRGO Rock Overdrive

Бренд: Celestial Effects Страницы: 2

HQ POWER VDSM02

Бренд: Velleman Страницы: 7

Бренд: Velleman Страницы: 12

Бренд: Dunlop Страницы: 2

M-120 MXR Auto Q

Бренд: Dunlop Страницы: 4

Бренд: RCF Страницы: 24

Бренд: RCF Страницы: 40

Бренд: Gemini Страницы: 28

Бренд: thomann Страницы: 28

Бренд: D.A.S. Страницы: 27

Бренд: JBL Страницы: 47

Бренд: Lexicon Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды