Eventide Space страница 22 Скачать руководство пользователя

Страница: 22 / 50

User Guide Algorithms

distortion, but sonically it can range from the light friction of a bow scraping a cello string to

the mayhem of a caged beast being poked with a red hot flounder. Judicious use of the Xnob

and Ynob is approved, and try small [SIZE] and short [DECAY] for some surprising sounds.

Mix – [MIX]: wet/dry mixer, 100% is all wet signal

Decay – [DECAY]: arbitrary 1-100 decay (less decay will also take away reverb attack)

Size – [SIZE]: size of the reverb (try <15 for some great distortion sounds)

Delay – [PDLY]: pre-delay time in milliseconds or note-based in tempo mode

Low – [LOW-LVL]: pre-distortion boost/cut of low frequencies

High – [HI-LVL]: pre-distortion boost/cut of high frequencies

Contour – [MID-LVL]: pre-distortion boost/cut of mid frequencies

FXMIX – [WOBBLE]: a modulation rate that does some spooky detuning

Ynob – [OUTPUT]: the output level of the distortion

Xnob – [SOFTCLIP], [OVRDRIVE]: the input level to one of two different types of distortions

TremoloVerb

TremoloVerb is a celestially large reverb cut back down to Earth size by an aggressive tremolo.

Use the Sine, Triangle, Peak, Ramp, or Square waves to create a rhythmic ambience; Random

and Sample/Hold to create a convulsing cloud; Envelope or ADSR to control the reverb with

your playing; or the Expression Pedal to control it with your foot.

Mix – [MIX]: wet/dry mixer, 100% is all wet signal

Decay – [DECAY]: decay in seconds or note-based in Tempo Mode

Size – [SIZE]: room size of reverb

Delay – [PDLY]: pre-delay time in milliseconds or note-based in tempo mode

Low – [LOW-LVL]: post reverb shelving boost/cut of low frequencies with cut-off at 350 Hz

High – [HI-LVL]: post reverb shelving boost/cut of high frequencies with cutoff at [HIFREQ]

Contour – [HIFREQ]: the high corner frequency of [HILVL]. This affects the sound as long as

[HI-LVL] is not set to 0

FXMIX – [MONO DPTH / ST DPTH]: tremolo depth, in stereo mode you have the option to

have mono depth (same on both channels) or stereo depth (tremolo is 90 degrees out of

phase)

Ynob – [SPEED]: tremolo speed in Hz, sensitivity, or note-based in tempo mode

Xnob – [SHP]: tremolo shape: [SINE], [TRIANGL], [PEAK], [RANDOM], [RAMP], [SQUARE],

[SMP/HLD] (sample/hold), [ENVELOP], [ADSR], or [EXP PDL] (Expression Pedal)

DynaVerb

DynaVerb couples an Eventide Eclipse reverb with a model of the Eventide Omnipressor® to

create an adaptable dynamics reverb. The Omnipressor is capable of all types of dynamics

processing from gating, expansion, compression, limiting, and even its signature "dynamic

reversal," where loud signals are squashed, but quiet signals are amplified. In DynaVerb, the

Omnipressor can dynamically control the output of a reverberator based on, either the input

signal for maximum control, the reverb output for incredible chaos, or any mixture of the

two. As an added bonus DynaVerb can also be used as a standalone Omnipressor by setting

[DECAY] to zero.

Mix – [MIX]: wet/dry mixer, 100% is all wet signal

Decay – [DECAY]: decay in seconds or note-based in Tempo Mode, when decay is 0, this

effect can be used as a standalone Omnipressor® or gate

Size – [SIZE]: room size of reverb

Delay – [ATK]: attack time of Omnipressor/gate in seconds

Low – [LOW-LVL]: post reverb shelving boost/cut of low frequencies with cut-off at 350 Hz

High – [HI-LVL]: post reverb shelving boost/cut of high frequencies with cutoff at 2000 Hz

Содержание Space



















































Результаты поиска

Содержание Space

Отзывы:

Похожие инструкции для Space

Бренды по названию

Популярные бренды

Eventide Space, Руководство пользователя

Результаты поиска

Содержание Space

Отзывы:

Похожие инструкции для Space

Бренды по названию

Популярные бренды