Eventide ModFactor Скачать руководство пользователя страница 46

Страница: 46 / 50

ModFactor User Guide

System Mode

[BANKS] – Select the Range of Active Preset Banks (1-20)

Press the Encoder to select. The BillBoard displays the lower and upper limits of the range of

active Banks. The lower limit is shown at the left of the display [Lxx] and the upper limit [Hxx]

at the right. A flashing arrow indicates whether the upper or lower limit is controlled by the

Encoder. To set the upper limit, press the Right Footswitch and turn the Encoder. Press the

Left Footswitch to and turn the Encoder to set the lower limit. Only Presets saved in the range

of active Banks are available for loading using the Footswitches when in Bank Mode. All

Presets may still be loaded using MIDI program change.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[PDLOCK] – Enable Expression Pedal Lock (ON, OFF)

Press the Encoder to select. Turn the Encoder to set Pedal Lock ON or OFF.

With Pedal Lock OFF, the Expression Pedal can be programmed live at any time. With Pedal

Lock ON, Expression Pedal programming is disabled and all Expression Pedal settings are

locked.

The Pedal Lock feature is a good way to ensure that Expression Pedal settings do not change.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[PDLCAL] – Auto-Calibrate Expression Pedal (ON, OFF)

Press the Encoder to select. Turn the Encoder to set Auto-Calibration ON or OFF. See p.25 for

more info on Pedal Calibration.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[LFO DISP] Animated LFO Display (ON, OFF)

Press the Encoder to select. Turn the Encoder to enable/disable the animated LFO display.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[SER#] – Serial Number

Press the Encoder to display your ModFactor’s unique serial number. You’ll need to know this

number to request support and to download software updates.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[SW VER] - Software Version

Press the Encoder to display your ModFactor’s software version.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

Содержание ModFactor



















































Результаты поиска

Содержание ModFactor

Отзывы:

Eventide ModFactor, Руководство пользователя, Страница: 46 / 50

Результаты поиска

Содержание ModFactor

Отзывы: