Eventide ModFactor Скачать руководство пользователя страница 43

Страница: 43 / 50

ModFactor User Guide

System Mode

To map another Prg No. to another Preset, simply press the Left Footswitch again to select

the desired Prg No. and then the Right Footswitch to map it to the desired Preset.

Default map: Prg No. 0-39 map to the 40 Presets starting with Bank 1:1.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

[XMT MAP] – Create a MIDI Program Change Transmit Map

In Bank Mode, when a Footswitch is used to recall a Preset, a MIDI Program Change message

can be transmitted from the MIDI Out jack or USB to control an external device (e.g. another

Factor series Stompbox, an Eventide Eclipse, an Eventide H000FW, etc.).

To Create a MIDI Program Change transmit map Press the Encoder to access the MIDI

transmit map for editing.

The left field displays the Bank Preset number (from 1:1 to 20:2). The right field displays

either OFF or the Prg No. (0-127).

Press the Left Footswitch to select Preset/Effect field (indicated by a flashing left hand arrow

pointing), turn the Encoder to select the Preset.

Press the Right Footswitch to select Prg No. field (indicated by a flashing right hand arrow

pointing to MIDI Program Change #), turn the Encoder to select the corresponding number.

Default map: Prg No. 0-19 map to the 40 Presets starting with Bank 1:1.

Note: When a Factor Preset is recalled with a MIDI program change message, MIDI Program

Change messages are not generated.

Note: MIDI Program Change Transmit must be enabled in order for ModFactor to transmit

Program Change messages. MIDI Program Change Transmit is turned ON or OFF in the MIDI

menu. Default is OFF.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

[MIDICLK] – MIDI Clock Enable (ON, OFF)

Press the Encoder to select. Turn Encoder to set MIDI Clock Receive ON or OFF. If ON, MIDI

Clock is used as a Tempo source. The display will flash if no MIDI Clock is found.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

[CTL XMT] – MIDI Continuous Controller Transmit Enable (ON, OFF)

Press the Encoder to select. Turn Encoder to set MIDI Continuous Controller transmit ON or

OFF.

This setting determines if Parameter Knobs transmit MIDI control messages.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

Содержание ModFactor



















































Результаты поиска

Содержание ModFactor

Отзывы:

Похожие инструкции для ModFactor

Бренды по названию

Популярные бренды

Eventide ModFactor, Руководство пользователя

Результаты поиска

Содержание ModFactor

Отзывы:

Похожие инструкции для ModFactor

Бренды по названию

Популярные бренды