Eventide ModFactor Скачать руководство пользователя страница 45

Страница: 45 / 50

TimeFactor User Guide

System Menu Tree

[GLOBAL] – Global Settings

[TEMPO] – Enable Global Tempo (ON, OFF)

Press the Encoder to select. Turn Encoder to set Global Tempo.

Tempo is always stored with Presets, but the stored value is not used if Global Tempo is ON.

With Global ON, the current Tempo is used for all Presets.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[ISW] – Enable Global Input Swell (ON, OFF)

Press the Encoder to select. Turn the Knob to set Global Input Swell ON or OFF. If Global

Input Swell is ON, Input Swell will always be active, whether or not it was enabled in the

current preset.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[OSW] – Enable Global Output Swell (ON, OFF)

Press the Encoder to select. Turn the Knob to set Global Output Swell ON or OFF. If Global

Output Swell is ON, Output Swell will always be active, whether or not it was enabled in the

current preset.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[UTILITY] - Utility Functions

After entering System mode, turn the Encoder to select [UTILITY], then press the Encoder to

enter the Utility functions settings mode. Turn the Encoder to scroll through the following

Utility functions. Press the Encoder to select and set:

[ROUTE] – Set the Routing Mode (NORMAL, PRE.PST, WET.DRY)

See p.33 for information on Routing Modes.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[KNOBS] – Select how Knobs work (NORMAL, CATCHUP, LOCKED)

Press the Encoder to select. Turn the Encoder to select CATCHUP or lock the knobs.

In NORMAL mode, the Parameter Control Knobs are always active.

With CATCHUP selected, the Parameter Control Knobs must be turned to the position which

corresponds to their current parameter value before they become active. See p.24 for more

info on CATCHUP.

The knobs can also be LOCKED, to prevent inadvertent changes to your sound.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

Содержание ModFactor



















































Результаты поиска

Содержание ModFactor

Отзывы:

Похожие инструкции для ModFactor

Бренды по названию

Популярные бренды

Eventide ModFactor, Руководство пользователя

Результаты поиска

Содержание ModFactor

Отзывы:

Похожие инструкции для ModFactor

Бренды по названию

Популярные бренды