Eventide ModFactor Скачать руководство пользователя страница 42

Страница: 42 / 50

ModFactor User Guide

System Mode

[XMT CC] – Control knobs transmit MIDI Continuous Control

The default patch is as follows:

PDL>C15, KB0>C22, KB1>C23, KB2>C24,…,KB9>C31

XMT CC makes it possible to use ModFactor’s Expression Pedal and Control Knobs as MIDI

controllers.

Here’s how it works:

Press the Encoder to select XMT CC. You will see two fields (split display) of the Billboard

display showing Control source and Destination assignments. An arrow pointing to the left

(Control Source) is flashing (if its not, press the Left Footswitch to select this field) showing

this to be the selected field for editing.

To Select the Control Source

Turn the Encoder knob to select the Control Source. The choices are:

PDL – Expression Pedal.

KB0…9 – Parameter Control Knobs

To Assign the Control Source to a Destination

Press the Right Footswitch to select the MIDI Continuous Control that will be assigned to the

ModFactor Control Source. The choices are:

OFF – Control Source unassigned.

C0 - C99 - MIDI Continuous Controller from 0 to 99.

Press the Left and Right Footswitches to toggle between Source and Destination to make as

many assignments as you wish.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

[RCV MAP] – Create a MIDI Program Change Receive Map

MIDI maps are an efficient way to instantly recall any of ModFactor’s Presets using your

favorite MIDI controller (pedal board, sequencer, etc.).

Press the Encoder to select and create a MIDI Program Change Receive Map. This function

sets the corresponding Preset that is recalled when a MIDI Program Change message is

received. (Referred to as Prg No. from here on.)

The left field displays the Prg No. (0-127) and right field displays either OFF or the Preset as

Bank:Preset (1:1-20:2).

There are two ways to select the MIDI Prg No: manually or using Learn Mode. To select

manually, with the left arrow flashing, simply turn the Encoder to select the desired Prg No.

from 0 to 127.

To use Learn Mode, press the Left Footswitch again. In LEARN mode, the Prg. No. will be

automatically set when a MIDI Program Change message is received. Pressing the Left

Footswitch exits LEARN mode.

Press the Right Footswitch to select the Bank Preset field (indicated by a flashing right hand

arrow) and turn the Encoder to select the Preset.

Содержание ModFactor



















































Результаты поиска

Содержание ModFactor

Отзывы:

Eventide ModFactor, Руководство пользователя, Страница: 42 / 50

Результаты поиска

Содержание ModFactor

Отзывы: