Eventide ModFactor, Руководство пользователя, Страница: 38 / 50

ModFactor User Guide System Mode
38
To assign the switches, first select the ModFactor parameter or function (the
destination) that you want to externally control (Intensity for example) and then
select the Aux Switch that you want to control it with (the source).
To Setup Parameter Destinations
Turn the Encoder knob to select an external control destination. Destinations
include the ModFactor parameters and functions that can be controlled by one of
the Aux Switches. The choices are:
BYP – Toggle Bypass/Active. (Bypass type selected in BYPASS)
BK + – Increment Bank number switch function.
BK - – Decrement Bank number switch function.
TAP – Tap tempo switch function.
BRK – Brake Function.
P/B – Toggle between Play and Bank Mode.
KB0…9 – Because of the limited space in the Billboard display, the Parameter
Control Knob names cannot be meaningfully displayed. Instead, for display
purposes, we’ve numbered the knobs from 0 to 9 indicate below.
FS1 – Left footswitch
FS2 – Middle footswitch
FS3 – Right footswitch
The notion of using an On/Off control source like an Aux Switch to control a variable
parameter bears some explanation. Consider a variable parameter like Intensity.
After you’ve selected a Parameter Control Knob, you can set two values for the parameter; a
minimum value [MIN VAL] and a maximum value [MAX VAL]. Each time the assigned switch
is pressed, the parameter value instantly toggles between the minimum and maximum value.
When a Parameter Control Knob designator is displayed (KB0… KB9), pressing the Left
Footswitch will display [MIN VAL]. Turn the associated Parameter Control Knob to set the
minimum value. For example, if KB0 was selected, turn the Intensity Control Knob to set the