3.4.3
Knockout Locations
Electrical Knock Outs are provided on all surfaces of the Lite-Minder. Ensure all metal conduit
is secured and tightened creating a good connection to earth ground. Use an Ohm-Meter to
check that continuity between conduit and protective earth ground has been established.
At NO time is drilling allowed into the cabinet! Drilling causes metal filings to be deposited on
surfaces and could land on the Printed Circuit Boards and cause short circuits.
WARNING – Drilling into cabinet may void warranty if metal filings
causes unit failure.
Pg. 8
Space for Optional Mounting Kit
(see page 7)
Wall
Wall
bottom View
top view
right side view
front view
4x .28 dia. mounting holes
(floor mounting)
knockouts on
rear panel
12x double web
knockouts
.875/1.125 dia.
17.72