4.0
AC Connections
WARNING – Only qualified personnel that are familiar with AC and DC
installation techniques and codes (such as an electrician) should perform the
installation.
WARNING – The Lite-Minder contains lethal AC Voltages. Because of these
hazards, always shut down all sources of power before you install, maintain,
or service the unit.
WARNING – Remove all rings, watches, and other jewelry before doing any
electrical service or installation work. Always wear protective clothing and
appropriate personal protective equipment (PPE) that is suitable such as eye
protection when working near batteries.
4.1
Removing the Top Cover
All the connections for the AC input and output are located on the top right side of the units’
enclosure. To access this wiring area, remove the top 2 screws that secure the units Top
Cover. After the two top screws are removed, simply slide the Top Cover forward and then
slide it down so that the bottom flange releases from the cabinets mating flange.
remove 2 screws - pull
cover forward and down
and back to remove
Installation Switch
disconnect
installation
switch
remove screw and
lift off cover
AC Breaker/
Terminal Block Cover
Cover Removal
Inverter Cover
lift
Pg. 9