Salt Bath 709 / 718 / 818
Installation and Operating Manual
North American Model
June 2019
Page
15
of
36
Installing the Lid Drip Shield
Place the lid drip shield on the lid. The lid drip shield should be placed with the broken edge towards the control panel as shown.
Lid Drip Shield
See page 29 for part numbers
Lid Drip Shield Installed
Salt Pot Ground Strap Installation to Salt Pot Grounding Lug
Connect the salt pot grounding strap to the salt pot ground lug as shown. The connection should be tight. We like to place the salt pot grounding lug pointing to the
left-rear of lid. This tends to place it out of the way of the immersion thermocouple and dragout.
The salt pot ground strap connection must be inspected periodically, cleaned if necessary and replaced when it no longer provides a good ground connection.
Salt Pot Ground Strap Attached to the Salt Pot
Salt Bath Kiln Set-up is Now Complete
