Salt Bath 709 / 718 / 818
Installation and Operating Manual
North American Model
June 2019
Page
29
of
36
Replacement Parts List
Immersion Thermocouple Assembly SB 709
#11647.309
Immersion Thermocouple Assembly SB 718 & SB 818
#11647.310
Chamber Thermocouple Assembly
#11647.305
Over-Temp Thermocouple Assembly
#11647.315
Immersion Thermocouple Lead Assembly
#11647.312
Chamber Thermocouple Lead Assembly
#11647.307
Immersion Thermocouple Pot Mount
#11647.320
Refractory Fiber Gasketing Strips – 14” x 1” x 1/2"
#06423.305
Refractory Fiber Pot Cover – 12” x 12” x 1”
#06423.300
Salt Pot Ground Strap
#08298.235
Salt Pot Grounding Hardware
#11647.325
Heating Element for models SB 709 and SB 718
#00349.900
Heating Element for model SB 818
#00349.905
Drip Shield for Control Panel for models SB 709 and SB 718
#07453.004
Drip Shield for Control Panel for model SB 818
#07454.006
Drip Shield for Lid for models SB 709 and SB 718 with for 4” Pot
#07453.000
Drip Shield for Lid for models SB 709 and SB 718 with for 5” Pot
#07453.002
Drip Shield for Lid for model SB 818 with for 4” Pot
#07454.000
Drip Shield for Lid for model SB 818 with for 5” Pot
#07454.002
Drip Shield for Lid for model SB 818 with for 6” Pot
#07454.004
Floor for models SB 709 and SB 718
#00342.208
Floor for model SB 818
#00342.209
Elemented Brick Section for models SB 709 and SB 718 – “Repair Ring”
#07276.000
Elemented Brick Section for model 818 – “Repair Ring”
#07276.005
Lid for models SB 709 and SB 718 – No Hole
#00342.300
Lid for models SB 709 and SB 718 for 4” Pot - Hole cut to 4.75” dia.
#00342.210
Lid for models SB 709 and SB 718 for 5” Pot - Hole cut to 5.813” dia.
#00342.215
Lid for model SB 818 – No Hole
#00342.305
Lid for model SB 818 for 4” Pot - Hole cut to 4.75” dia.
#00342.220
Lid for model SB 818 for 5” Pot - Hole cut to 5.813” dia.
#00342.225
Lid for model SB 818 for 6” Pot - Hole cut to 6.875” dia.
#00342.230
Salt Pot Design Details
Evenheat salt pots are fabricated from 316 stainless steel. 316 is chosen for its relatively better corrosion resistance. If you provide your own pot we would suggest
this material as well. Any material that you chose for your salt pot must be made of an electrically conductive material.
Evenheat salt pots are designed to extend at least 1-1/2” above the top surface of the kiln lid. This added length allows for placement of the salt pot ground. If you
provide your own salt pot please make sure your design includes this feature.
Evenheat salt pots include a 1/4" hole, drilled 3/4" down from the lip of the pot to provide a mounting point for salt pot grounding hardware. Salt pot grounding
hardware is all stainless steel and consists of a ¼-20 x 1” bolt, lockwasher, nut, flatwashers and a wingnut. As the salt pot ground is subject to corrosion, and
replacement when necessary, this hardware is very common and readily available from local sources.
